1、精心處置各種升降貨梯http://www.inductor-china.com/襯墊。如機油盤或氣門罩蓋，由于接觸面積大，不易壓實，容易造成升降貨梯漏油。按修理規范擰緊升降貨梯各螺母，過松壓不緊升降貨梯襯墊會滲油，過緊會使升降貨梯螺孔周圍金屬凸起或將絲扣擰滑引起漏油。
Carefully dispose of all kinds of cargo lifter pad. Such as the oil pan or valve cover, due to the large contact area, easy compaction, cargo lifter likely to cause oil spills. Press repair specifications tighten each nut cargo lifter,pressure is not too loose tight liner cargo lifter will permeability, tight cargo lifter will screw around screwing the threaded metal bumps or slippery causing oil spills.

2、及時更換升降貨梯失效油封，油封安裝不妥，軸頸與油封刃口不同心，極易因偏擺而甩油；有些經長期使用后，會因橡膠老化而失去彈性、密封唇口損壞開裂或自緊彈簧失效，均會喪失封油作用，應按標準修復或更換合格升降貨梯配件。
The timely replacement of cargo lifter failure seals, oil seals improper installation, journal and seal edge misalignment, yaw and rejection vulnerable to oil; after some long-term use, due to loss of elasticity of rubber aging, cracking or damage to the sealing lip self-tightening spring failure, will lose the role of seal oil, should be qualified to repair or replace the standard cargo lifter accessories.

3、及時更換升降貨梯磨損嚴重的機件，當主軸承與軸頸配合間隙過大時，前后油封會因曲軸沖擊作用而失去密封性，造成機油從曲軸頭部外漏，或向離合器內滲油，從而污染摩擦片導致打滑，升降貨梯工作失效。
The timely replacement of cargo lifter badly worn parts, when the main bearing and journal with the gap is too large, the front and rear crankshaft seal due to the impact of the loss of the role of tightness, causing oil leakage from the crankshaft of the head, or into the clutches permeability, thereby pollution lead slip friction plate, cargo lifter fails to work.

升降貨梯：http://www.inductor-china.com/